Skip to content

Cart

Your cart is empty.

Subtotal:

incl. VAT, shipping calculated at checkout

Smartboatia app and Hub

Version 1.47.0

Published
October 7, 2026
New
11
Bug fixes
15

Version 1.47.0 is about documenting your trips properly and making Smartboatia fit every boat. Export your logbook as a PDF, tell the app whether you sail or motor, and follow your autopilot in the logbook. Hub updates become much more transparent, and the Hub now gets online in many marinas on its own.

Logbook

  • Export your logbook as a PDF in a classic technical ship's log layout. With your phone connected to the Hub, pick a time range and get a continuous table with time, event, position, distance and duration, plus your boat details on every page. Ready to archive or hand over.
  • Autopilot engaged, disengaged and course changes of 10 degrees or more now appear in your logbook, with their own ship's wheel icon.
  • You decide per logbook category whether you want to be asked to confirm detected entries. Alarm events no longer interrupt you with a confirmation.

Boat Monitoring

  • Onboard Systems now shows "Smartboatia Hub" as the source instead of technical service names, and tank names are consistent everywhere.
  • Set and adjust the anchor watch directly on the map of the Alarms screen, without switching to the Plotter.

Plotter & Navigation

  • AIS targets are now passed on as NMEA 0183 sentences, so other devices on your NMEA 0183 multiplexer can see them too.

Community & Sharing

  • #sailorsgram route videos can now show extra values such as water depth as an overlay, and use an icon matching your boat type.

App, Hub & Account

  • Tell the app whether your boat is a sailboat or a motorboat, and for sailboats whether it is a monohull or multihull. Motorboats no longer see sailing-only instruments, pages and trim advice.
  • Hub setup now explains the power and NMEA connection with animations and graphics. If you do not have a Hub yet, the setup screen shows a compact overview of what it adds for you.
  • Hub updates are now downloaded first and installed when you decide. A new full screen shows a clear progress bar for download and installation.
  • The Hub can now automatically accept the login page of many marina WiFi networks, so it gets online without you having to do anything.

Bug Fixes

  • Air pressure measured by the Hub did not always reach the app.
  • A single faulty pressure reading could trigger a false storm warning.
  • The Hub could not connect to some marina WiFi networks, including WPA3 and mixed WPA2/WPA3 networks.
  • Changing the onboard WiFi password could damage the Hub's WiFi setup.
  • Hub updates could get stuck when the connection dropped, and update errors were not reported properly.
  • Several Hub services could restart in a loop; services now run more stable.
  • Environment charts could look complete while data was still loading.
  • Your fleet list could appear empty because of boat data the app did not recognize.
  • The rudder angle card in German labelled starboard and port incorrectly.
  • Unit labels in settings showed "kmh" and "ms", and the Appearance section appeared twice.
  • Hub setup showed a blank screen with a large system font size.
  • Android tablets were wrongly locked to portrait mode.
  • The Start Trip button could sit behind the Android navigation bar.
  • Some subscriptions were not recognized.
  • Clearer texts around Boat Buddies invitations and the sea state info.