We found nothing for that. Try another term.
The search could not be loaded. Reload the page and try again.
History views and time range selector
You also see every important data type as a history view, for example air pressure as a barograph, ground wind as a strength and direction curve, the wind rose, sea state, water depth, water temperature and supply voltage. On board the data comes straight from the Hub, without internet and up to 400 days back. If you connect the Hub to the cloud, you also see the history views remotely. When opened, the period matches what your boat is doing right now, for example everything since casting off. You choose a different period once at the top of the header bar, for example the last 30 minutes, a calendar day or a logbook entry, and it applies to all views. If the period runs up to now, the curves on board keep growing live.
What you get
On board
- “Environment” screen with all environment history views and a small map. Tapping a tile opens it large.
| View | What it shows |
|---|---|
| Barograph | Air pressure in hPa, with a narrow axis so that even small changes are visible |
| Battery Voltage | Supply voltage in volts, plus the setting for your battery alarm |
| GWD Graph | Ground wind direction over time |
| GWS | lowest, average and highest ground wind in the period as three bars |
| GWS Graph | Ground wind strength as a curve with range |
| SSI Graph | Sea state as an index: the higher, the rougher |
| Depth Graph | lowest water depth per time segment, depth plotted downwards |
| Water Temp Graph | Water temperature |
| Wind Direction | Wind rose with 16 sectors: how long the ground wind came from which direction |
- Current value in the heading as long as the period runs up to now.
- Tapping the curve shows time and value at that point.
- Your units: For temperature and wind strength the history views use the unit you chose in the settings, with axis and values converted to match. The app always shows air pressure in hPa.
- Other ways in: The air pressure display on the map opens the barograph, the Battery Voltage tile in the Plotter opens the supply voltage history.
Remotely
- If you connect the Hub to the cloud, you see the same views with your boat’s history, and so do your Boat Buddies. There you choose the period from calendar or logbook.
How it works
Opening history views
- Open Menu › Environment and tap a tile.
Choosing a period
Tap the time range selector at the top right in the header bar:
- “Show last”: Choose a number from 1 to 60 and minutes, hours or days, for example 2 hours. Up to three quick buttons show your most frequent choices. The period runs up to now and moves along. On board only.
- “Pick from calendar”: Days with a trip are shaded grey. Choose one day or several. A single past day with a trip is automatically shortened to your trip time. If your selection includes today, the period runs up to now: the curves on board keep growing live, and the map keeps showing AIS vessels and your Boat Buddies’ boats.
- “Pick from ship’s log”: Choose one or two logbook entries. With two entries the period between them applies, with one from the entry up to now.
The chosen period also applies to the other screens with a time range selector, for example the map with your track.
Period when opened
| Where | Period |
|---|---|
| On board | matching what your boat is doing right now: If you are under way, everything since casting off. If you are at the pontoon, at a mooring or at anchor, everything since berthing. At most 60 days back. If the Hub does not report the time immediately, the app first shows the last 30 minutes |
| Remotely | your last trip according to the logbook, from casting off to the next berthing, mooring or anchoring, or up to now if the trip is still running; if there is none, the day your boat last sent data, otherwise the last 7 days |
Your own choice applies until you open another boat, switch the connection or restart the app.
Requirements
- On board: app connected to the Hub. No internet, no account, no subscription needed.
- Remotely: Smartboatia ID, a boat in the cloud and internet on your phone or tablet.
- For the individual data types the matching devices, for example an echo sounder for depth. Air pressure, sea state and supply voltage are measured by the Hub itself.
Permissions and subscription
| Boat subscription | On board | Remotely |
|---|---|---|
| Without a subscription | all history views, 400 days | the last 3 months, with a delay of up to 6 hours |
| Standard subscription | all history views, 400 days | in addition the entire history, after about a minute |
- On board: Everyone connected to the Hub sees all history views and sets the battery alarm.
- Remotely: Owner and Boat Buddies see all history views. The owner also finds the GPX export in the time range selector.
Notifications
None of their own. Two notices on board lead here: the storm warning to the barograph and the notice about low supply voltage to Battery Voltage (see Notices in the app).
Messages and special cases
| Situation | What you see |
|---|---|
| Data is loading | Loading circle or a narrow loading bar above the old curve |
| No data in the period (depth, temperature, ground wind) | “No data” |
| No data in the period (air pressure, supply voltage, sea state, wind rose) | empty chart |
| No data in the period (GWS bars) | three bars at 0 |
| Query failed | “Uh ohh … something went wrong!” and “Data temporarily not available”; for depth, temperature and ground wind with a “Retry” button. Other views, track and manoeuvres show what had loaded up to then, or stay empty; the app keeps running |
| Calendar day without a trip | whole day from 0 to 24 hours |
Offline behaviour
- On board everything works without internet, the data is on the Hub.
- Remotely you need internet.
- After a Hub restart the history is kept.
Frequently asked questions
Where do I find the air pressure history?
Open Menu › Environment and tap the Barograph tile. The air pressure display on the map also opens the barograph.
How do I choose a different period?
Tap the time range selector at the top right and choose "Show last" (on board only), "Pick from calendar" or "Pick from ship's log". The period also applies to the other screens with a time range selector, for example the map with your track.
Which period does the app show when opened?
On board it matches what your boat is doing right now: when under way everything since casting off, at the berth everything since berthing. Remotely the app shows your last trip according to the logbook.
How far back do the history views go?
On board 400 days, straight from the Hub and without internet. Remotely the last 3 months without a subscription, the entire history with the Standard subscription.
Why does a history view say "No data"?
There are no values for this data type in the selected period. For some data types you need the matching devices, for example an echo sounder for depth; air pressure, sea state and supply voltage are measured by the Hub itself.
Do my Boat Buddies see the history views too?
Yes, if you connect the Hub to the cloud. You and your Boat Buddies then see the same views with your boat's history.